Home  |  About Us  |  Products  |  Gallery | News  |  Enquiry  |  Contact 

Products Link
Printing & Cutting / Rewinding machine
PET / PP Box Strap Line

Printing Machine Brochure

Download PDF (4.4 MB)

(Right Click and Select "Save Target As...")

Printing and Cutting / Rewinding Machines :

Online Corona Treating, 4 to 6 colour Printing, Perforating, Gusseting & Cutting machine for HDPE / PP laminated and un-laminated woven fabrics.

Features :

  • Turret Unwinder with Online Manual Splicing
  • Specially designed Micrometric adjustment system provided at each Printing Station to have fine pressure from Anilox Roll to Printing Drum and from Printing Drum to final product (Fabric). This will improves better sharpness of Printing.
  • Individual Gearbox system consists of hardened and ground oil dipped gears with inbuilt planetary arrangement at each printing station. This increases the sturdiness of the machine which reduces maintenance and downtime.
  • Online print registration adjustment provided in that gearbox for easy operation. 
  • Easy changeover for change of direction of printing with the help of same gearbox system is also incorporated.
  • Infeed and outfeed driven nip roll system to maintain constant tension of fabric for proper Print registration. It will not elongate the fabric or loosen the fabric between printing station. 
  • Anilox and Ink Rubber Rolls are of special design. This prevents splashing and scattering of Ink at higher operating speeds.
  • Access to each printing station for ease of monitoring and cleaning.
  • Operator Friendly and space saving vertical gusseting unit.
6 COLOUR PRINTING MACHINE MODEL JPFLEX


6 COLOUR PRINTING MACHINE MODEL JPFLEX

Advanced Features :

  • Line Speed : 150 MPM Maximum

  • Each Printing Stations are individually driven by Servo Motor resulting Quick & High Stability of Print Registration.

  • Doctor Chamber Blades + Ceramic Rolls to Print High Quality Halftone Image.

  • Fast Drying of Ink because of effective Air Drying System.

  • To Save consumption of Ink and Solvent.

  • Online Both Side Web Video System for Print Inspection.

  • Electrical Hoist System for easy assembly of plate cylinder (Drum).

  • Reduction in Start and Stop Wastage due to Slow Rotation of Ceramic Rolls and Automatic Hydraulic Elevation of Drum Rolls while machine stops.

    The machine consists of following :

  • Unwinder with Pneumatic Caliper Brake System and Load Cell.

  • Edge Guiding System

  • Corona Treater

  • 760 mm Six Colour Flexographic Printing Station with Doctor Chamber Blade and Ceramic Roll and Auto Drum Lifting Arrangement.

  • Hot Air Ink Drying System.

  • Auto Viscosity Control per Station.

  • Four Roll Surface Winder with Oscillation System
    Control Panel with PLC.

  • Web Inspection System.

 
Printing & Cutting Machine - Technical Specification :
MODEL
Print Width
Printing Posibilities
Min - Maxi Repeat Print
4 COLOUR 
760 mm 
4+0 | 3+0 | 2+0 | 1+0 3+1 | 2+2 | 2+1 | 1+1
508 mm to 1250 mm
6 COLOUR
760 mm 
6+0 | 5+0 | 4+0 | 3+0 | 2+0 | 1+0 |5+1 | 4+2 | 3+3
508 mm to 1250 mm
8 COLOUR
760 mm 
8+0 | 6+2 | 4+4
508 mm to 1250 mm
 
 Click on the image to view large.
6 Col.Servo,150 m/min
6 Col.Servo,150 m/min
Print Stn., 150 m/min
4 col., with Air Dryer
4 col., with Air Dryer
4 Col, L & UL, Winder
Lami, Un-Lami, Winder
Lami, Un-Lami, Winder
6 Col, Dryer, Auto Lift
Fibrelutor Unit
6 Col, Dryer, Auto Lift
4 Colour Flexo M/c.
6 Colour Flexo M/c.
Auto Doffing Winder
Gusseting Device
Laminated Cutter
Un-Laminated Cutter
Micro Perforation
6 Colour Flexo M/c.
Gusseting Device
 
  E-mail: info@jpel.in
Click to go on TOP    
Copyright 2013 - J P EXTRUSIONTECH LIMITED